Disel Boom Lift

Disel Boom Lift

Articulated Aerial Work Platform High-altitude platform can be divided into straight arm type and crank arm type according to the form of arm exhibition. The crank arm type high-altitude platform is designed by multi-stage folding arm combination mode, which is flexible and convenient, and can...

Product Details

Articulated Aerial Work Platform

High-altitude platform can be divided into straight arm type and crank arm type according to the form of arm exhibition. The crank arm type high-altitude platform is designed by multi-stage folding arm combination mode, which is flexible and convenient, and can surmount certain obstacles and carry out multi-point operation in one place. Safety is good, mobile is convenient, but the cost is long. The crank-arm aerial platform car is widely used in the installation, maintenance and climbing of urban management, electric power, street lamp, advertisement, communication, view-taking, gardening, transportation, wharf, Airport port, large industrial and mining companies and other industries.


The product platform is simple to control, marked with operation action identification map, easy to understand the operation. The ground can also control the lifting and rotation of the equipment. Equipped with hydraulic support foot, automatic adjustment level, LED indicator shows whether the support foot is installed in place. Each supporting foot can be controlled independently. The platform can extend outward to increase the working area. The platform can be leveled automatically when it is lifted, and the hydraulic power can rotate 90 degrees automatically. All models are equipped with 1.3m long hydraulic short arms which can rotate 140 degrees, and work more flexibly. In case of power failure or other faults, the emergency drop switch can be activated to lower the platform. The proportional electro-hydraulic control system can adjust the lifting and rotating speed at will. Products are equipped with horizontal display, horizontal sensors, multiple safety systems, fully ensure the safety of staff. Battery power model products, durable, pollution-free and low noise. Automatic charger is randomly allocated. Electricity display instrument shows the remaining battery power. Product rotation angle is not comparable to other products. TL37 chassis can rotate 700 degrees, TL49L can rotate 680 degrees, the working area is larger and the efficiency is higher. The manual pump can drop the working platform when the emergency drop switch cannot work. Pneumatic tire, smooth towing, fast speed, maximum speed up to 90 km/h. The products are equipped with complete road lights to facilitate towing on urban roads and increase road safety. Alarm system: When the slipway happens, the equipment will give a buzzing alarm until the power supply is cut off and all actions are stopped. When the platform is overloaded, the equipment will give a buzzing alarm until the power supply is cut off and all actions are stopped.

                                       GTZZ24Z-24m Diesel articulated boom lift

Model

GTZZ24Z

图片3

 

Working Height Maximum

26.2m

Platform Height Maximum

24.2m

Working radius maximum

15.8m

Lift capacity

230kg

Crossing height maximum

9.8m

Length( stowed)  Ⓓ

9.92m

Width (stowed)  Ⓔ

2.48m

Height(stowed) Ⓒ

2.82m

Wheel base Ⓕ

3m

Ground clearance  Ⓖ

430mm

Platform measurement  Ⓑ*Ⓐ

1.83*0.76

Turning Radius(inside)

2.6m

GTZZ24Z RANGE OF MOTION

 

Tuning radius (outside)

5.2m

图片4

Travel speed(stowed)

6.3km/h(2WD);4.2km/h(4WD)

Travel speed(raised or extended)

1.1km/h

Grade ability

30%(2WD);45%(4WD)

Solid tire

36*14-20

Swing speed

0~1/3 rpm

Turn table swing

360° Continuous

Platform leveling

Automatic leveling

Platform rotation

±80°

Fuel tank volume

100L

Total weight

15500kg(2WD);15700kg(4WD)

Control voltage

12V

Drive & steering type

4*2*2,4*4*2

Engine

Cummins(QSF2.8-C58)
Yanmar(4TNV94L-BXPHZ)

CONFIGURATION

图片5

Engine

Yanmar(Japan);
Cummins(USA)

Variable pump(boom lifting)

SAUER(USA)            

Variable pump(driving)

CASSAPPA(Italy)

Travel motor

SAUER(USA)

Travel reducer

PMP(Italy)

Hydraulic valve

Hydroforce(USA)
Sant(China)

Rotary motor:

HELAC(USA)

图片2

Inquiry