The head of boom and piston rod of oil cylinder is built with anti-dust and anti-sand device for protection during operation.
The chassis and turntable are designed loop hole for hanging for the concern of transportation convenience.
The basket is self-leveling,and the maximum tilt angle is 1.5 degree.
Both ground control table and basket control table are designed for operation and they can be switched each other,but the both functions can not be working at the same time.they are protected by shields.
Boom stretching out and drawing back stably and buffer function designed during operation.
The driving and turntable rotating are designed with reliable braker,to gurantee the control stability on slope.
GTZZ14Z-16m working height(Diesel Articulated Boom Lift)
Specification
Model |
GTZZ14Z |
Working Height Maximum |
16m |
Platform Height Maximum |
14m |
Working radius maximum |
8m |
Lift capacity |
230kg |
Crossing height maximum |
7.6m |
Length( stowed) Ⓓ |
6.8m |
Width (stowed) Ⓔ |
2.29m |
Height(stowed) Ⓒ |
2.36m |
Wheel base Ⓕ |
2.45m |
Ground clearance Ⓖ |
430mm |
Platform measurement Ⓑ*Ⓐ |
1.83*0.76 |
Tuning radius (inside) |
1.9m |
Tuning radius (outside) |
4.7m |
Travel speed(stowed) |
4.2km/h(4WD) |
Travel speed(raised or extended) |
1.1km/h |
Grade ability |
45%(4WD) |
Solid tire |
33*12-20 |
Swing speed |
0~0.8rpm |
Turntable swing |
360° Continuous |
Platform leveling |
Automatic leveling |
Platform rotation |
±80° |
fuel tank volume |
100L |
Total weight |
8800kg |
Control voltage |
12V |
Drive & steering type |
4WD*2WS |
Engine |
Yanmar 4TNV94L-BxPHZ |
CONFIGURATION |
|
Engine |
Yanmar(Japan) |
Variable pump(boom) |
Cassappa(Italy) |
Variable pump(drive) |
SAUER(USA) |
Travel motor |
SAUER(USA) |
Travel reducer |
PMP(Italy) |
Hydraulic valve |
Hydroforce(USA) |
Rotary motor: |
Whlionshare(China) |
The Structural Sketch
The motion range diagram